Component Operating Range
WARNING: This page is about a different variant/trim than selected.
C0597 (CASE 1)
| All of the following conditions are met | - |
| Command to solenoid relay | On |
| Power supply for solenoid | Higher than 6 V |
| +BS voltage | Higher than 9.5 V, and less than 17.4 V |
| Booster circuit voltage drop signal | Off |
C0597 (CASE 2)
| All of the following conditions are met | - |
| +BS voltage | 9.5 V or more |
| Solenoid relay | Off |
| ASIC output permission | Off |
| ECU state | Pre main |
| ABS pump motor fail (C052B, C052D, C052E, C055B) | Not detected |
| Brake system voltage fail (C143B, C143C) | Not detected |
| ABS hold solenoid fail (C0597) | Not detected |
| Wheel speed sensor fail (C14E1, C14E4, C14E7, C14EA) | Not detected |
C0597 (CASE 3)
| All of the following conditions are met | - |
| +BS voltage | 9.5 V or more |
| Solenoid relay | On |
| ASIC output permission | Off |
| Solenoid current output order value | 160 mA |
| Power supply voltage for solenoid | 6 V or more |
| ECU state | Pre main |
| ABS pump motor fail (C052B, C052D, C052E, C055B) | Not detected |
| Brake system voltage fail (C143B, C143C) | Not detected |
| ABS hold solenoid fail (C0597) | Not detected |
| Wheel speed sensor fail (C14E1, C14E4, C14E7, C14EA) | Not detected |
C0597 (CASE 4)
| All of the following conditions are met | - |
| +BS voltage | 9.5 V or more |
| Solenoid relay | On |
| ASIC output permission | Off |
| NO solenoid current output order value | 160 mA |
| NC solenoid output order value | On |
| Power supply voltage for solenoid | 6 V or more |
| ECU state | Pre main |
| ABS pump motor fail (C052B, C052D, C052E, C055B) | Not detected |
| Brake system voltage fail (C143B, C143C) | Not detected |
| ABS hold solenoid fail (C0597) | Not detected |
| Wheel speed sensor fail (C14E1, C14E4, C14E7, C14EA) | Not detected |
C0597 (CASE 5)
| All of the following conditions are met | - |
| Solenoid relay | Off |
| ASIC output permission | Off |
| ASIC send data | NG answer |
| ECU state | Pre main |
| ABS pump motor fail (C052B, C052D, C052E, C055B) | Not detected |
| Brake system voltage fail (C143B, C143C) | Not detected |
| ABS hold solenoid fail (C0597) | Not detected |
| Wheel speed sensor fail (C14E1, C14E4, C14E7, C14EA) | Not detected |
C12F6, C12F7 AND C13BF
| All of the following conditions are met | - |
| Solenoid initial check state | Complete |
| ABS release solenoid fail (C12C9, C12B3, C12F5, C12DF, C12C8, C12B2, C12F4, C12DE) | Not detected |
| ABS hold solenoid fail (C12BE, C12A8, C12EA, C12D4, C12BD, C12A7, C12E9, C12D3, C12F6, C12F7) | Not detected |
| Brake system voltage fail (C143B, C143C) | Not detected |
| SM solenoid fail (C13C3, C13CC, C13C2, C13CB, C13BF) | Not detected |