DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Electronically Controlled Brake System (HV) - Diagnostic Codes (05 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C05A1-28: Brake Pressure Sensor "E" Signal Bias Level Out of Range / Zero Adjustment Failure [12/2019 - 11/2023] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different variant/trim than selected.
Related DTCs C05A2: Servo pressure sensor exceeded learning limit
Required Sensors/Components (Main) Brake actuator (brake booster with master cylinder assembly)
Required Sensors/Components (Related) Brake pedal stroke sensor assembly
Brake actuator (brake booster with master cylinder assembly)
Stop light switch assembly
Frequency of Operation Continuous
Duration 3 seconds
MIL Operation Immediately
Sequence of Operation None