DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Electronically Controlled Brake System (HV) - Diagnostic Codes (05 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C05A1-28: Brake Pressure Sensor "E" Signal Bias Level Out of Range / Zero Adjustment Failure [11/2023 - ] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different variant/trim than selected.
All of the following conditions are met -
Servo pressure sensor circuit fail Not detected
Brake position sensor circuit fail Not detected
Reaction force pressure sensor circuit fail Not detected
Brake Off
Servo pressure sensor -0.63 MPa (-6.4 kgf/cm2 , -91.4 psi) or more, and 1.53 MPa (15.6 kgf/cm2 , 222 psi) or less
Diesel-Data.com