Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
ALL
| Monitor runs whenever the following DTCs are not stored | C1241: Brake system voltage input out of range low U0125: Lost communication with multi-axis acceleration sensor module |
CASE 1
| All of the following conditions are met | - |
| Dealer Mode | Off |
| Acceleration sensor zero point learning command reception presence | Off |
| Vehicle speed | 40 km/h (24.85 mph) or more |
| IG1 | On |
CASE 2
| Both of the following conditions are met | - |
| Learning of zero position | Complete |
| IG1 | On |
CASE 3
| All of the following conditions are met | - |
| Last learning of zero position | Not complete |
| Current learning of zero position | Complete |
| IG1 | On |