DTC C0520-62: Multi-axis Acceleration Sensor Module "A" Signal Compare Failure [11/2023 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION
- Check that the yaw rate and acceleration sensor (airbag sensor assembly) has been installed properly.
Refer to INSTALLATION [11/2023 - ]
OK
The yaw rate and acceleration sensor (airbag sensor assembly) is tightened to the specified torque.
The yaw rate and acceleration sensor (airbag sensor assembly) is not installed in a tilted position.
Result
Proceed to OK NG
Result:
OK
REPLACE AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL [11/2023 - ]
Result:
NG
INSTALL AIRBAG SENSOR ASSEMBLY CORRECTLY. Refer to INSTALLATION [11/2023 - ]
- Check that the yaw rate and acceleration sensor (airbag sensor assembly) has been installed properly.