DTC C0526-96: Steering Angle Sensor Module Component Internal Failure [12/2019 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The No. 2 skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C0526-96 | Steering Angle Sensor Module Component Internal Failure | With the +BS terminal voltage 9.5 to 17.4 V, the No. 2 skid control ECU (brake actuator assembly) receives an error signal from the steering angle sensor. | Steering angle sensor | Does not come on | Output ECU: No. 2 skid control ECU (brake actuator assembly) |