Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
CASE 1
| Monitor runs whenever the following DTCs are not stored | C050D (Case 4): Wheel speed sensor (RL) range/performance C050E: Wheel speed sensor (RL) voltage circuit open C137D: Brake system voltage input out of range high C14E7: Wheel speed sensor (RL) voltage circuit low |
| Both of the following conditions are met | - |
| Command to wheel speed sensor power supply | On |
| +BS voltage | 17.4 V or less |
CASE 2
| Monitor runs whenever the following DTCs are not stored | None |
| Power supply for wheel speed sensor | Off |