DTC C050C-23: Left Rear Wheel Speed Sensor Signal Stuck Low [10/2021 - 10/2022]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC C050C-12.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
C050C-23	Left Rear Wheel Speed Sensor Signal Stuck Low	Any of the following is detected: When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) or more, output voltage from one of the speed sensors is less than that from the other sensors for 15 seconds or more.2 When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) or more, output voltage from one of the speed sensors is less than that from the other sensors for 30 seconds or more.1 When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) or more, output from one of the speed sensors is 0 km/h (0 mph) for 1 second or more. When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) or more, outputs from both rear speed sensors are 0 km/h (0 mph) for 15 seconds or more.2 When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) or more, outputs from both rear speed sensors are 0 km/h (0 mph) for 30 seconds or more.1	Rear skid control sensor LH1 Rear speed sensor LH (rear axle hub and bearing assembly LH)2 Speed sensor installation Skid control sensor wire LH (No. 2 parking brake wire assembly) Wire harness and connector Rear speed sensor rotor LH (rear axle hub and bearing assembly LH)	Comes on	SAE Code: C050D (Case 1 to 3) Output ECU: No. 2 skid control ECU (brake actuator assembly)