DTC C050C-3A: Left Rear Wheel Speed Sensor Signal Has Too Many Pulses; DTC C0512-3A: Right Rear Wheel Speed Sensor Signal Has Too Many Pulses [11/2023 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC C050C-12.
Refer to DTC C050C-12: Left Rear Wheel Speed Sensor Circuit Short to Battery [11/2023 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C050C-3A | Left Rear Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Comes on |
|
| C0512-3A | Right Rear Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Comes on |
|