Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| Monitor runs whenever the following DTCs are not stored | C0501 (Case 4): Wheel speed sensor (FL) range/performance C0503: Wheel speed sensor (FL) voltage circuit high C137C: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14E1: Wheel speed sensor (FL) voltage circuit low |
| All of the following conditions are met | - |
| +BS voltage | 17.4 V or less |
| +BS voltage | 8.5 V or more |
| Command to wheel speed sensor power supply | On |
| Vehicle speed sensor supply voltage state | Valid |
| Wheel speed sensor current | Less than 0.034 A |