DTC C0500-3A: Left Front Wheel Speed Sensor Signal Has Too Many Pulses; DTC C0506-3A: Right Front Wheel Speed Sensor Signal Has Too Many Pulses [11/2023 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC C0500-12.
Refer to DTC C0500-12: Left Front Wheel Speed Sensor Circuit Short to Battery [11/2023 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C0500-3A | Left Front Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Comes on |
|
| C0506-3A | Right Front Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Comes on |
|