Caution / Notice / Hint

HINT: 

Images may be unclear even in normal conditions if: 

• Noise may occur in the image when operating the power back door.
• Noise may occur in the image when adjusting the mirror surface of the outer rear view mirror assembly.
• Noise may occur in the image depending on electrical devices used in the vehicle.
• Noise may occur in the image if any aftermarket devices that emit radio waves are installed to the vehicle.
• The display is cold. (The image may have ghosting or may be darker than usual immediately after the ignition switch is turned to ON (IG).)
• A camera lens is covered with foreign matter
• A camera lens is covered with foreign matter, etc.
• A very bright light, such as the sun or headlights of oncoming traffic, is shining directly into a camera.
• The area around a camera is dark (at night, etc.)
• The temperature around a camera is excessively high or low.
• The vehicle or road is on an incline.
• The brightness of the surrounding area is not sufficient
• A camera lens is scratched
• A camera lens has drops of water on it or the humidity is high
• The panoramic view monitor system is used under illumination such as fluorescent lamps, sodium lamps, mercury lamps, etc., when a flicker phenomenon may occur where the lights and the parts illuminated by the lights appear to flicker.