DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Fog Light Assembly >> Inspection [12/2019 - 09/2020] >> Procedure

Inspection [12/2019 - 09/2020]: Procedure

  1. INSPECT FOG LIGHT ASSEMBLY LH 
    1. Illumination Inspection
      GTY906382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fog Light Assembly LH)
      1. Apply auxiliary battery voltage to the fog light assembly LH and check that the light illuminates.

        OK

        Measurement Condition Specified Condition
        Auxiliary battery positive (+) → Terminal 2 (B)
        Auxiliary battery negative (-) → Terminal 1 (E)        		 Fog light illuminates

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH 
    1. Illumination Inspection
      GTY906382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fog Light Assembly RH)
      1. Apply auxiliary battery voltage to the fog light assembly RH and check that the light illuminates.

        OK

        Measurement Condition Specified Condition
        Auxiliary battery positive (+) → Terminal 2 (B)
        Auxiliary battery negative (-) → Terminal 1 (E)        		 Fog light illuminates

      If the result is not as specified, replace the fog light assembly RH.

Diesel-Data.com