DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Panoramic View Monitor System - Diagnostics - Introduction (1 Of 2) >> Panoramic View Monitor System >> Initialization [12/2019 - 10/2022] >> Initialization [12/2019 - 10/2022]

Initialization [12/2019 - 10/2022]

  1. INITIALIZE PANORAMIC VIEW MONITOR SYSTEM 
    1. When "!" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.
      1. Fully turn the steering wheel to the left and right on level ground.
        NOTE:

        Memorizing the steering angle neutral point must be carried out with the engine running*1, hybrid system operating*2. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        1. *1: for Gasoline Model
        2. *2: for HV Model

        HINT: 

        If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right, perform Steering Angle Setting in Calibration.

        Refer to CALIBRATION [12/2019 - 10/2022] 

Diesel-Data.com