Installation [12/2019 - ]: Procedure

INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
1. Engage the guide.
2. Install the bolt and 2 nuts.
  Bolt
  
  Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf)
  
  Nut
  
  Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf)
3. Engage the guide.
4. Install the rear height control sensor sub-assembly LH with the bolt.
  Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf)
5. Connect the connector.
INSTALL REAR WHEEL (for LH Side)
Refer to INSTALLATION [12/2019 - ]
PERFORM INITIALIZATION
Refer to INITIALIZATION [12/2019 - 11/2023] , or refer to INITIALIZATION [11/2023 - ]
INSPECT HEADLIGHT AIMING
Refer to ADJUSTMENT [12/2019 - ]