Caution / Notice / Hint
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during headlight ECU sub-assembly removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)
| Replaced Part or Performed Procedures | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Headlight ECU sub-assembly LH |
|
Lighting System (EXT) (w/ AFS) | Refer to INITIALIZATION [12/2019 - 11/2023] |
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)
| Replaced Part or Performed Procedures | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Headlight ECU sub-assembly LH |
|
Lighting System (EXT) (w/ AFS) | Refer to INITIALIZATION [12/2019 - 11/2023] |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.