Utility [10/2022 - ]

HINT: 

• With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
• You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.

1. Clear the DTCs even if no DTCs are stored.

   Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

2. Turn the ignition switch off and wait for 2 minutes or more.
3. Turn the ignition switch to ON.
4. Perform the DTC judgment driving pattern to run the DTC judgment.

   Chassis > Circumference Monitoring Camera Control Module > Utility 

   Tester Display
   All Readiness

5. Input the DTCs to be confirmed.
6. Check the DTC judgment result.

   HINT: 

   GTS Display	Description
   Normal	DTC judgment completed System normal
   Abnormal	DTC judgment completed System abnormal
   Incomplete	DTC judgment not completed Perform the driving pattern

   If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again.

HINT: 

This utility is used to clear the image information stored in the parking assist ECU.

1. Perform "Image Information Clear " according to the display on the GTS.

   Chassis > Circumference Monitoring Camera Control Module > Utility 

   Tester Display
   Image Information Clear

HINT: 

This utility is used to enable/disable image recording.

1. Perform "Image Recording Setting" according to the display on the GTS.

   Chassis > Circumference Monitoring Camera Control Module > Utility 

   Tester Display
   Image Record Setting