Inspection [12/2019 - ]: Procedure

INSPECT FRONT DRIVE SHAFT ASSEMBLY

Check that there is no excessive play in the radial direction of the outboard joint.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check that the inboard joint slides smoothly in the thrust direction.
Check that there is no excessive play in the radial direction of the inboard joint.
Check the boots for damage.

Check whether the drive shaft dimension (A) and (B) are within specification.

NOTE:

Keep the drive shaft assembly level during inspection.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for LH Side
*B	for RH Side

Dimension (A)

for LH Side	621.1 mm (2.04 ft.)
for RH Side	946.5 mm (3.10 ft.)

Dimension (B)

for LH Side	105.2 to 105.8 mm (4.15 to 4.16 in.)
for RH Side	97.3 to 98.3 mm (3.84 to 3.87 in.)