DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft / Propeller Shaft - Service Information >> FRONT DRIVE SHAFT ASSEMBLY (for 2GR-FKS) >> Inspection [12/2019 - 10/2022] >> Procedure

Inspection [12/2019 - 10/2022]: Procedure

  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY 
    1. Check that there is no excessive play in the radial direction of the outboard joint.
      GTY223263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the inboard joint slides smoothly in the thrust direction.
    3. Check that there is no excessive play in the radial direction of the inboard joint.
    4. Check the boots for damage.
    5. Check whether the drive shaft dimension (A) and (B) are within specification.
      NOTE:

      Keep the drive shaft assembly level during inspection.

      GTY771210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for LH Side
      *B for RH Side

      Dimension (A)

      for LH Side 621.1 mm (2.04 ft.)
      for RH Side for 2WD 946.5 mm (3.10 ft.)
      for AWD 949 mm (3.11 ft.)

      Dimension (B)

      for LH Side 105.2 to 105.8 mm (4.15 to 4.16 in.)
      for RH Side for 2WD 97.3 to 98.3 mm (3.84 to 3.87 in.)
      for AWD -
Diesel-Data.com