DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Assist Monitor System - Diagnostics - Introduction >> Parking Assist Monitor System >> DTC Check / Clear [12/2019 - 10/2022] >> DTC Check / Clear [12/2019 - 10/2022]

DTC Check / Clear [12/2019 - 10/2022]

  1. CHECK DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Rear Camera / Trouble Codes.

      Chassis > Rear Camera > Trouble Codes 

    5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

      Body Electrical > Navigation System > Trouble Codes 

    6. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2022] 

      NOTE:
  2. CLEAR DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Rear Camera / Trouble Codes.

      Chassis > Rear Camera > Clear DTCs 

    5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

      Body Electrical > Navigation System > Clear DTCs 

    6. Clear the DTCs.