Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory [10/2022 - ]: Procedure
- CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
- Check radio condition.
OK
Broadcast cannot be selected
Result
Result Proceed to Broadcast cannot be selected. OK Broadcast cannot be selected, but selection cannot be memorized. NG
Result:
OK
ADD PRESET CHANNEL INTO MEMORY AGAIN
Result:
NG
See step 2
- Check radio condition.
- CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
- Check the number of preset channels.
OK
36 channels have already been preset.
Result
Proceed to OK NG
Result:
OK
END (ONLY 36 CHANNELS CAN BE PRESET)
Result:
NG
See step 3
- Check the number of preset channels.
- CHECK AUXILIARY BATTERY
- Check if the auxiliary battery was replaced.
OK
Auxiliary Battery was not replaced.
Result
Proceed to OK NG
Result:
OK
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
Refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]
Result:
NG
See step 4
- Check if the auxiliary battery was replaced.
- ADD PRESET CHANNEL INTO MEMORY AGAIN
- Check if the preset channels that have been cleared can be added into memory again.
OK
Preset channels can be added into memory.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
Refer to PROBLEM SYMPTOMS TABLE [10/2022 - 11/2024] , or refer to PROBLEM SYMPTOMS TABLE [11/2024 - ]
- Check if the preset channels that have been cleared can be added into memory again.