Precaution [12/2019 - 10/2022]
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTE:
- After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.
- When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the terminal is reconnected.
System Name See Procedure Stop and Start System (for Gasoline Model) Refer to INITIALIZATION [12/2019 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2021] , or refer to INITIALIZATION [10/2021 - 10/2022] Lane Control System Parking Support Brake System Pre-collision System Lighting System (EXT) (w/ AFS) Parking Assist Monitor System Panoramic View Monitor System Power Door Lock Control System Power Back Door System
- PRECAUTION FOR AUDIO AND VISUAL SYSTEM NOTE:
When replacing the DCM (telematics transceiver), make sure to replace it with a new one (w/ Telematics Transceiver).
- If any of the following parts are replaced, refer to Initialization in Repair Instruction.
Refer to INITIALIZATION [12/2019 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2021] , or refer to INITIALIZATION [10/2021 - 10/2022]
- Radio and display receiver assembly*1
- DCM (telematics transceiver)*2
- *1: After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, SiriusXM radio ID registration is necessary (w/ SXM Function).
*2: w/ Telematics Transceiver
- If any of the following parts are replaced, refer to Initialization in Repair Instruction.