Operation Check [12/2019 - 10/2022]

CHECK WINDSHIELD DEICER SYSTEM
1. Turn the ignition switch to ON.
2. Check that the windshield deicer wire (windshield glass) becomes warm by operating the front wiper deicer switch.
3. Confirm that windshield deicer system operation stops after approximately 15 minutes.
  NOTE:
  If the auxiliary battery voltage becomes low, auxiliary battery load control will operate in order to ensure sufficient power is supplied to the power steering system. In this case, the windshield deicer system may not operate.*
  1. *: for 8 Inch Display