Operation Check [11/2023 - ]
- CHECK WINDSHIELD DEICER SYSTEMÂ NOTE:
If the windshield deicer system is operated when the auxiliary battery voltage is low, due to the electrical load limit control that gives voltage supply priority to the power steering system, the windshield deicer system may not operate. In this case, check the vehicle control history (RoB) of the power steering system and check that "Battery Voltage Drop: X208F" is not stored before proceeding with troubleshooting.
- Turn the ignition switch to ON.
- Check that the windshield deicer wire (windshield glass) becomes warm by operating the front wiper deicer switch.
- Confirm that windshield deicer system operation stops after approximately 15 minutes.