HVAC Evaporator Drain Hose Clogged Due To Insect Intrusion (T-SB-0080-19 REV1)
WARNING: This page is about the Highlander Hybrid LE, 2.5L Eng VIN A, which is a different variant/trim than selected.
Publication date: 2021-07-26Reference number: T-SB-0080-19 REV1
Supersedes refnos: T-SB-0080-19
HVAC EVAPORATOR DRAIN HOSE CLOGGED DUE TO INSECT INTRUSION
TECHNICAL SERVICE BULLETIN
Reference Number(s): T-SB-0080-19 Rev1, Date of Issue:
July 26, 2021
Superceded Bulletin(s): T-SB-0080-19, Date of Issue:
July 09, 2019
| TOYOTA: | 2010 - 2022 4Runner, Prius; 2013 - 2022 Avalon HV; 2007 - 2022 Avalon, Camry, Camry HV; 2018 - 2022 C-HR; 2022 Corolla Cross, Tundra; 2019 - 2022 Corolla Hatchback; 2009 - 2022 Corolla; 2007 - 2014 FJ Cruiser; 2008 - 2022 Highlander, Highlander HV; 2009 - 2013 Matrix; 2016 - 2022 Mirai; 2012 - 2018 Prius C; 2010, 2012 - 2015 Prius PHV; 2017 - 2022 Prius Prime; 2012 - 2017 Prius V; 2013 - 2014 RAV4 EV; 2006 - 2022 RAV4; 2021 - 2022 Sienna HV, Venza HV; 2011 - 2020 Sienna; 2010 - 2022 Tacoma; 2009 - 2016 Venza; 2007 - 2019 Yaris; 2017 - 2018 iM |
| SERVICE CATEGORY: | Vehicle Interior |
| SECTION: | Heating/Air Conditioning |
| MARKET: | USA |
| COPYRIGHT: | © 2021 Toyota, USA License Agreement TMS1002 |
APPLICABILITY
APPLICABILITY
| YEAR(S) | MODEL(S) | ADDITIONAL INFORMATION |
|---|---|---|
| 2010 - 2022 | 4Runner, Prius | |
| 2013 - 2022 | Avalon HV | |
| 2007 - 2022 | Avalon, Camry, Camry HV | |
| 2018 - 2022 | C-HR | |
| 2022 | Corolla Cross, Tundra | |
| 2019 - 2022 | Corolla Hatchback | |
| 2009 - 2022 | Corolla | |
| 2007 - 2014 | FJ Cruiser | |
| 2008 - 2022 | Highlander, Highlander HV | |
| 2009 - 2013 | Matrix | |
| 2016 - 2022 | Mirai | |
| 2012 - 2018 | Prius C | |
| 2010, 2012 - 2015 | Prius PHV | |
| 2017 - 2022 | Prius Prime | |
| 2012 - 2017 | Prius V | |
| 2013 - 2014 | RAV4 EV | |
| 2006 - 2022 | RAV4 | |
| 2021 - 2022 | Sienna HV, Venza HV | |
| 2011 - 2020 | Sienna | |
| 2010 - 2022 | Tacoma | |
| 2009 - 2016 | Venza | |
| 2007 - 2019 | Yaris | |
| 2017 - 2018 | iM |
REVISION NOTICE
July 26, 2021 Rev1:
- Applicability has been updated to include 2010 - 2022 model year Toyota vehicles.
- The Parts Information section has been modified.
- The Repair Procedure E section has been added.
Any previous printed versions of this bulletin should be discarded.
SUPERSESSION NOTICE
The information contained in this bulletin supersedes Service Bulletin No. T-SB-0033-14.
- Applicability has been updated to include 2019 model year Toyota vehicles.
Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded.
INTRODUCTION
Some 2006 - 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
NOTE:
The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.
WARRANTY INFORMATION
WARRANTY INFORMATION
| OP CODE | DESCRIPTION | TIME | OFP | T1 | T2 |
|---|---|---|---|---|---|
| N/A | Not Applicable to Warranty | - | - | - | - |
PARTS INFORMATION
PARTS INFORMATION
| MODEL | MODEL YEAR | PART NUMBER | PART NAME | REPAIR PROCEDURE | QTY | |
|---|---|---|---|---|---|---|
| PREVIOUS | NEW | |||||
| All | 2006 - 2022 | 87265-33010 | Water Hose Connector (ARINIX® Tip) | All | 1 | |
| 4Runner | 2010 - 2022 | 88539-60340 | Hose, Drain Cooler | B | 1 | |
| Avalon | 2007 - 2018 | 88539-06121 | 88539-33160 | A | 1 | |
| Avalon HV | 2013 - 2018 | |||||
| Avalon/Avalon HV | 2019 - 2022 | 88539-33130 88888-06020 | Hose, Drain Cooler, Grommet | E | 1 | |
| Camry/Camry HV | 2007 - 2017 (NAP) 2007 - 2011 (Japan Prod.) | 88539-06121 88539-06120 88539-33090 | 88539-33160 | Hose, Drain Cooler | A | 1 |
| Camry (NAP and Japan Prod.) | 2018 - 2022 | 88539-06230 88888-06020 | Hose, Drain Cooler, Grommet | E | 1 | |
| Camry (AWD) | 2021 - 2022 | 1 | ||||
| C-HR | 2018 - 2022 | 88539-47060 88888-06020 88539-F4010 88888-47010 | D | 1 | ||
| Corolla iM | 2016 - 2019 | 88539-12230 | Hose, Drain Cooler | B | 1 | |
| Corolla Hatchback | 2019 - 2022 | 88539-47060 | 1 | |||
| Corolla | 2009 - 2013 | 88539-02160 88539-02410 88539-12200 |
88539-02270 | A | 1 | |
| 90480-26030 | Grommet | 1 | ||||
| 2014 - 2019 | 88539-02270 | 1 | ||||
| 2019 - 2022 | 88539-47060 | Hose, Drain Cooler | B | 1 | ||
| Corolla Cross | 2022 | 88539-02430 | Hose, Drain Cooler | B | 1 | |
| FJ Cruiser | 2007 - 2014 | 88539-35030 | 1 | |||
| Highlander/Highlander HV (NAP) | 2010 - 2016 | 88539-0E010 | 1 | |||
| Highlander/Highlander HV (Japan Prod.) | 2008 - 2013 | 88539-48040 | 88539-0E010 | A | 1 | |
| Highlander/Highlander HV | 2017 - 2019 | 88539-0E010 | 88539-0E090 | 1 | ||
| 2020 - 2022 | 88539-0E100 88888-06020 | Hose, Drain Cooler, Grommet | E | 1 | ||
| Matrix | 2009 - 2013 | 88539-02160 | 88539-02270 | Grommet | A | 1 |
| 90480-26030 | 1 | |||||
| Mirai | 2016 - 2020 | 88539-12230 | Hose, Drain Cooler | B | 1 | |
| 2021 - 2022 | 88539-11020 88539-50210 |
1 | ||||
| Prius | 2010 - 2013 | 88539-12200 88539-02160 | 88539-12230 | A | 1 | |
| 90480-26030 | Grommet | 1 | ||||
| 2014 - 2015 | 88539-12230 | Hose, Drain Cooler | B | 1 | ||
| 2016 - 2022 | 88539-47060 | 1 | ||||
| Prius C | 2012 - 2018 | 88539-52040 | 1 | |||
| Prius PHV | 2010 - 2012 | 88539-12200 88539-02160 | 88539-12230 | A | 1 | |
| 90480-26030 | Grommet | 1 | ||||
| 2013 - 2015 | 88539-12230 | Hose, Drain Cooler | B | 1 | ||
| Prius Prime | 2017 - 2022 | 88539-47060 | 1 | |||
| Prius V | 2012 - 2013 | 88539-12200 88539-02160 |
88539-12230 | Hose, Drain Cooler | A | 1 |
| 90480-26030 | Grommet | 1 | ||||
| 2014 - 2017 | 88539-12230 | Hose, Drain Cooler | B | 1 | ||
| RAV4 | 2006 - 2018 | 88539-0R010 88539-42060 88539-42061 |
88539-0R011 | C | 1 | |
| 2019 - 2022 | 88539-0R050 88888-06020 |
Hose, Drain Cooler, Grommet | D | 1 | ||
| RAV4 EV | 2013 - 2014 | 88539-0R010 | 88539-0R011 | Hose, Drain Cooler | C | 1 |
| Sienna | 2011 - 2020 | 88539-08070 | B | 1 | ||
| Sienna HV | 2021 - 2022 | 88539-08200 | 1 | |||
| Tacoma | 2010 - 2019 | 88539-04050 | 1 | |||
| Tundra | 2022 | 88897-0C090 | Grommet Cooler | 1 | ||
| Venza | 2009 - 2016 | 88539-0T010 | Hose, Drain Cooler | 1 | ||
| Venza HV | 2021 - 2022 | 88539-42070 88888-47010 |
Hose, Drain Cooler, Grommet | E | 1 | |
| Yaris | 2007 - 2010 | 88539-52020 | Hose, Drain Cooler | B | 1 | |
| 2010 - 2011 | 88539-52040 | 1 | ||||
| Yaris (Japan Prod.) | 2011 - 2014 | 88539-52040 | 1 | |||
| Yaris (France Prod.) | 2014 - 2019 | 88539-0D180 | 1 | |||
REQUIRED TOOLS & EQUIPMENT
REQUIRED TOOLS & EQUIPMENT
| REQUIRED TOOLS & MATERIAL | QUANTITY |
|---|---|
| Chemical Resistant Gloves (Made From Waterproof Material) | 1 |
SAFETY REQUIREMENTS FOR HANDLING THE ARINIX® TIP (WATER HOSE CONNECTOR)
- Follow the manufacturer's instructions for cleaning/maintaining personal protection equipment (PPE). If no such instructions for cleaning/maintaining PPE exist, use detergent and hot water. Keep PPE separate from other laundry.
- Users should remove PPE immediately after handling this product.
- Wash the outside of the gloves before removing.
- Users should wash hands before eating, drinking, chewing gum, or using the toilet.
CAUTION:
IF SWALLOWED:
Call the poison control center or doctor IMMEDIATELY for treatment advice. Have the person sip a glass of water if able to swallow.
IF ON SKIN OR CLOTHING:
Take off the contaminated clothing IMMEDIATELY. Rinse skin IMMEDIATELY with plenty of water for 15 - 20 minutes. Call the poison control center or doctor for treatment advice.
IF IN EYES:
Hold eye open and rinse gently and slowly with water for 15 - 20 minutes. Remove contact lenses (if present) after the first 5 minutes, then continue rinsing eye. Call the poison control center or doctor for treatment advice.
HOTLINE NUMBER:
Have the product container or label with you when calling the poison control center, doctor, or going for treatment. You may also contact 800-424-9300 for emergency medical treatment information.
Call the poison control center or doctor IMMEDIATELY for treatment advice. Have the person sip a glass of water if able to swallow.
- Do NOT induce vomiting unless instructed by the poison control center or doctor.
- Do NOT give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING:
Take off the contaminated clothing IMMEDIATELY. Rinse skin IMMEDIATELY with plenty of water for 15 - 20 minutes. Call the poison control center or doctor for treatment advice.
IF IN EYES:
Hold eye open and rinse gently and slowly with water for 15 - 20 minutes. Remove contact lenses (if present) after the first 5 minutes, then continue rinsing eye. Call the poison control center or doctor for treatment advice.
HOTLINE NUMBER:
Have the product container or label with you when calling the poison control center, doctor, or going for treatment. You may also contact 800-424-9300 for emergency medical treatment information.
DIRECTIONS FOR USE ON ALL REPAIR PROCEDURES
The ARINIX® Tip contains permethrin, a pesticide, as the active ingredient. Please note, it is a violation of Federal law to use this product in a manner inconsistent with its labeling.
REPAIR PROCEDURE A
- Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) section of this bulletin.
- Locate the HVAC evaporator drain hose.
- Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
- Put on all necessary PPE and install the ARINIX® Tip (water hose connector) into the NEW HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
- When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as shown in Figure 1.
- Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
REPAIR PROCEDURE B
- Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) section of this bulletin.
- Locate the HVAC evaporator drain hose.
- Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
- Put on all necessary PPE and install the ARINIX® Tip (water hose connector) into the NEW HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
- When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as shown in Figure 1.
- Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
REPAIR PROCEDURE C
- Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) section of this bulletin.
- Locate the HVAC evaporator drain hose.
- Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
- Before installing the ARINIX® Tip (water hose connector) into the NEW HVAC evaporator drain hose, the end of the hose MUST be cut perpendicular as shown in Figure 2.
- Put on all necessary PPE and install the ARINIX® Tip into the NEW HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
- When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as shown in Figure 1.
- Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
REPAIR PROCEDURE D
- Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) section of this bulletin.
- Locate the HVAC evaporator drain hose.
- Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
- Before installing the ARINIX® Tip (water hose connector) into the original HVAC evaporator drain hose, the end of the hose MUST be cut perpendicular as shown in Figure 2.
- Put on all necessary PPE and install the ARINIX® Tip into the original HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
- When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as shown in Figure 1.
- Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
REPAIR PROCEDURE E
- Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) section of this bulletin.
- Locate the HVAC evaporator drain hose and floor grommet.
- Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose and floor grommet.
- Put on ALL necessary PPE and install the ARINIX® Tip (water hose connector) into the NEW HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
- When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as shown in Figure 1.
- Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose and the NEW floor grommet.