Driver Side Seat Belt Warning Light does not Operate [12/2019 - 11/2023]: Procedure
- CHECK DTC OUTPUT (AIRBAG SYSTEM)
- Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
- Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
Result Proceed to DTCs are not output A DTCs are output B
Result:
B
GO TO AIRBAG SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023]
Result:
A
See step 2
- Clear the DTCs.
- READ VALUE USING GTS
- Read the Data List according to the display on the GTS.
Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Left side Buckle SW LH buckle switch Unset, Set or NG Unset: Driver seat belt not fastened
Set: Driver seat belt fastened
NG: Data is not determined- Body Electrical > SRS Airbag > Data List
Tester Display Left side Buckle SW Result
Result Proceed to Unset or Set is displayed on the GTS according to the driver seat belt condition A Unset or Set is not displayed correctly on the GTS according to the driver seat belt condition B NG is displayed on the GTS C
Result:
A
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [12/2019 - ]
Result:
B
REPLACE FRONT SEAT INNER BELT ASSEMBLY LH
for Power Seat: Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
for Manual Seat: Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
Result:
C
REPLACE AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
- Read the Data List according to the display on the GTS.