DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type LH Side) >> Removal [12/2019 - ] >> Procedure

Removal [12/2019 - ]: Procedure

  1. REMOVE REAR NO. 1 SEAT ASSEMBLY 

    Refer to REMOVAL [12/2019 - ]

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH 

    Refer to PROCEDURE - Step 2

  3. REMOVE REAR SEAT CUSHION UNDER COVER LH 

    Refer to PROCEDURE - Step 3

  4. REMOVE SEAT ADJUSTER COVER CAP LH 

    Refer to PROCEDURE - Step 1

  5. REMOVE REAR SEAT NO. 1 LOCK CONTROL LEVER SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 5

  6. REMOVE REAR SEAT NO. 2 LOCK CONTROL LEVER SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 6

  7. REMOVE REAR SEAT CUSHION MOULDING LH 

    Refer to PROCEDURE - Step 7

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD 

    Refer to PROCEDURE - Step 8

  9. REMOVE REAR SEATBACK LOCK STRIKER COVER LH 

    Refer to PROCEDURE - Step 12

  10. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 13

  11. REMOVE REAR SEATBACK COVER LH 

    Refer to PROCEDURE - Step 14

  12. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 15

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD 

    Refer to PROCEDURE - Step 16

  14. REMOVE REAR SEAT CUSHION REAR MOULDING LH 

    Refer to PROCEDURE - Step 20

  15. REMOVE REAR NO. 1 SEAT RECLINING COVER RH 

    Refer to PROCEDURE - Step 21

  16. REMOVE REAR SEAT CUSHION HINGE COVER LH 

    Refer to PROCEDURE - Step 22

  17. REMOVE REAR SEAT INNER BELT ASSEMBLY LH 
    1. Disconnect the connector.
    2. Disengage each clamp.
    3. Disengage the clamp.
      GTY901282Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Wire Harness Clamp
    4. Remove the bolt and rear seat inner belt assembly LH.
Diesel-Data.com