DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> REAR NO. 2 SEAT INNER BELT ASSEMBLY (for RH Side) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY934233Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear No. 2 Seat Inner Belt Assembly RH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      B-1 - B-2 Rear No. 2 RH seat belt unfastened Below 1 Ω
      Rear No. 2 RH seat belt fastened 10 kΩ or higher
      B-4 - A-2 Always Below 1 Ω
      B-3 - A-1 Always Below 1 Ω

      If the result is not as specified, replace the rear No. 2 seat inner belt assembly RH.

Diesel-Data.com