Inspection [12/2019 - ]: Procedure
- INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY
- Before installing the rear No. 2 seat outer belt assembly, check the ELR function.
*a Retractor *b Unlock *c Lock *d 45° NOTE:Do not disassemble the retractor.
- When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
If the result is not as specified, replace the rear No. 2 seat outer belt assembly.
- When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
- Before installing the rear No. 2 seat outer belt assembly, check the ELR function.
