DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR SEAT INNER BELT ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY910231Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Seat Inner Belt Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      2 - 5 Rear No. 1 center seat belt unfastened Below 1 Ω
      Rear No. 1 center seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly.

Diesel-Data.com