DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat) >> On-Vehicle Inspection [12/2019 - ] >> Procedure

On-Vehicle Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR NO. 1 CENTER SEAT LAP TYPE BELT ASSEMBLY (for Vehicle not Involved in Collision) 
    1. Visually check for defects with the rear No. 1 center seat lap type belt assembly installed to the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the rear No. 1 center seat lap type belt assembly
        • Small cracks on the rear No. 1 center seat lap type belt assembly
        • Significant discoloration on the rear No. 1 center seat lap type belt assembly

        OK

        No defects are found.

        HINT: 

        If any defects are found, replace the rear No. 1 center seat lap type belt assembly with a new one.

  2. INSPECT REAR NO. 1 CENTER SEAT LAP TYPE BELT ASSEMBLY (for Vehicle Involved in Collision) 
    1. Visually check for defects with the rear No. 1 center seat lap type belt assembly removed from the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the rear No. 1 center seat lap type belt assembly
        • Small cracks on the rear No. 1 center seat lap type belt assembly
        • Significant discoloration on the rear No. 1 center seat lap type belt assembly
        • Cracks or other damage on the connector

        OK

        No defects are found.

        HINT: 

        If any defects are found, replace the rear No. 1 center seat lap type belt assembly with a new one.

Diesel-Data.com