DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY 
    1. Before installing the rear No. 1 seat center lap type belt assembly, check the ELR function.
      GTY935253Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Retractor
      *b 0°
      *c 21°
      *d 37°
      *e Unlock
      *f Lock
      NOTE:

      Do not disassemble the retractor.

      1. When the inclination of the retractor is between 21° and 37°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 21° or more than 37°, check that the belt locks.

        If the result is not as specified, replace the rear No. 1 seat center lap type belt assembly.

Diesel-Data.com