DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> Front Seat Outer Belt Assembly With Pre-TENSIONER >> On-Vehicle Inspection [11/2023 - ] >> Procedure

On-Vehicle Inspection [11/2023 - ]: Procedure

  1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision) 
    1. Perform a diagnostic system check.
    2. Visually check for defects with the front seat outer belt assembly installed to the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the front seat outer belt assembly
        • Small cracks on the front seat outer belt assembly
        • Significant discoloration on the front seat outer belt assembly

        OK

        No defects are found.

        HINT: 

        If any defects are found, replace the front seat outer belt assembly with a new one.

  2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision) 
    1. Perform a diagnostic system check.
    2. Visually check for defects with the front seat outer belt assembly removed from the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the front seat outer belt assembly
        • Small cracks on the front seat outer belt assembly
        • Significant discoloration on the front seat outer belt assembly
        • Cracks or other damage on the connector

        OK

        No defects are found.

        HINT: 

        If any defects are found, replace the front seat outer belt assembly with a new one.

Diesel-Data.com