DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> REAR NO. 1 SEAT INNER BELT ASSEMBLY (for Captain Seat Type) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR SEAT INNER BELT ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY869712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Seat Inner Belt Assembly LH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Rear No. 1 LH seat belt unfastened Below 1 Ω
      Rear No. 1 LH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly LH.

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY869712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Seat Inner Belt Assembly RH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Rear No. 1 RH seat belt unfastened Below 1 Ω
      Rear No. 1 RH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly LH.

Diesel-Data.com