DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type RH Side) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REMOVE REAR SEAT INNER BELT ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY906789Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Seat Inner Belt Assembly RH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 4 Rear No. 1 RH seat belt unfastened Below 1 Ω
      Rear No. 1 RH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly RH.

Diesel-Data.com