DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type RH Side) >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL REAR SEAT INNER BELT ASSEMBLY RH 
    1. Install the rear seat inner belt assembly RH with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

    2. Engage each clamp.
    3. Connect the connector.
  2. INSTALL REAR SEAT HINGE COVER 

    Refer to PROCEDURE - Step 31

  3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD 

    Refer to PROCEDURE - Step 35

  4. INSTALL REAR SEAT CUSHION MOULDING RH 

    Refer to PROCEDURE - Step 36

  5. INSTALL REAR SEAT NO. 2 LOCK CONTROL LEVER SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 37

  6. INSTALL REAR SEAT NO. 1 LOCK CONTROL LEVER SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 38

  7. INSTALL SEAT ADJUSTER COVER CAP 

    Refer to PROCEDURE - Step 39

  8. INSTALL REAR SEAT CUSHION UNDER COVER RH 

    Refer to PROCEDURE - Step 40

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH 

    Refer to PROCEDURE - Step 41

  10. INSTALL REAR NO. 1 SEAT ASSEMBLY 

    Refer to INSTALLATION [12/2019 - ]

Diesel-Data.com