DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> REAR NO. 2 SEAT INNER BELT ASSEMBLY (for LH Side) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY904267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear No. 2 Seat Inner Belt Assembly LH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      M69-3 - M69-6 Rear No. 2 LH seat belt unfastened Below 1 Ω
      Rear No. 2 LH seat belt fastened 10 kΩ or higher
      M69-5 - B-4 Always Below 1 Ω
      M69-2 - B-3 Always Below 1 Ω
      M69-4 - B-2 Always Below 1 Ω
      M69-1 - B-1 Always Below 1 Ω

      If the result is not as specified, replace the rear No. 2 seat inner belt assembly LH.

Diesel-Data.com