DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt - Service Information >> REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 2 Seat) >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL REAR NO. 2 SEAT 3 POINT TYPE BELT ASSEMBLY 
    1. Engage the 2 guides and temporarily install the rear No. 2 seat 3 point type belt assembly with the 2 bolts.
      GTY889942Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Fully tighten the bolt (A) first, then the bolt (B).

      Bolt (A) 

      Torque: 12.5 N*m (127 kgf*cm, 9 ft.*lbf) 

      Bolt (B) 

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

    3. Engage the guide and install the rear No. 2 seat 3 point type belt assembly with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  2. INSTALL ROOF HEADLINING ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

Diesel-Data.com