| FRONT AIR CONDITIONING UNIT |
Cooler expansion valve x No. 1 cooler evaporator sub-assembly |
3.5 N*m ( |
36 kgf*cm, |
|
31 in.*lbf) |
| Instrument panel reinforcement assembly x Inside vehicle body |
25 N*m ( |
255 kgf*cm, |
18 ft.*lbf) |
|
| Instrument panel reinforcement assembly x Brake pedal assembly |
15 N*m ( |
153 kgf*cm, |
11 ft.*lbf) |
|
| Instrument panel reinforcement assembly x Outside vehicle body |
25 N*m ( |
255 kgf*cm, |
18 ft.*lbf) |
|
| No. 2 instrument panel brace sub-assembly x Instrument panel reinforcement assembly |
18 N*m ( |
184 kgf*cm, |
13 ft.*lbf) |
|
| No. 2 instrument panel brace sub-assembly x Vehicle body |
20 N*m ( |
204 kgf*cm, |
15 ft.*lbf) |
|
| No. 1 instrument panel brace sub-assembly x Instrument panel reinforcement assembly |
18 N*m ( |
184 kgf*cm, |
13 ft.*lbf) |
|
| No. 1 instrument panel brace sub-assembly x Vehicle body |
20 N*m ( |
204 kgf*cm, |
15 ft.*lbf) |
|
| Air conditioner unit assembly x Instrument panel reinforcement assembly |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Air conditioner unit assembly x Vehicle body |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Earth wire x Vehicle body |
10 N*m ( |
102 kgf*cm, |
7 ft.*lbf) |
|
| Connector holder x Instrument panel reinforcement assembly (Nut) |
5.0 N*m ( |
51 kgf*cm, |
|
44 in.*lbf) |
| Instrument panel wire x Instrument panel reinforcement assembly |
5.0 N*m ( |
51 kgf*cm, |
|
44 in.*lbf) |
| Connector holder x Instrument panel reinforcement assembly (bolt (B)) |
12.5 N*m ( |
127 kgf*cm, |
9 ft.*lbf) |
|
| Earth wire x Instrument panel reinforcement assembly |
8.5 N*m ( |
87 kgf*cm, |
|
75 in.*lbf) |
| Suction pipe sub-assembly x Cooler expansion valve (for HV Model) |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Air conditioning tube assembly x Cooler expansion valve (for Gasoline Model) |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| REAR AIR CONDITIONING UNIT |
Rear evaporator sub-assembly x Rear cooling unit expansion valve |
3.1 N*m ( |
32 kgf*cm, |
|
27 in.*lbf) |
| Air conditioning hose and accessory x Rear cooling unit expansion valve |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Rear cooling unit assembly x Vehicle body |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Earth wire x Vehicle body (for HV Model) |
10 N*m ( |
102 kgf*cm, |
7 ft.*lbf) |
|
| Air conditioning hose and accessory x No. 2 air conditioning accessory assembly |
5.4 N*m ( |
55 kgf*cm, |
|
48 in.*lbf) |
| PTC HEATER ASSEMBLY |
No. 4 air duct sub-assembly set bolt |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| COMPRESSOR (for 2GR-FKS) |
Magnet clutch hub x Cooler compressor assembly |
18 N*m ( |
184 kgf*cm, |
13 ft.*lbf) |
|
| Drain bolt x Compressor and magnetic clutch |
30 N*m ( |
306 kgf*cm, |
22 ft.*lbf) |
|
| Compressor and magnetic clutch x Engine |
24.5 N*m ( |
250 kgf*cm, |
18 ft.*lbf) |
|
| Stud bolt x Engine |
10 N*m ( |
102 kgf*cm, |
7 ft.*lbf) |
|
| Suction hose sub-assembly x Compressor and magnetic clutch |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Discharge hose sub-assembly x Compressor and magnetic clutch |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| COMPRESSOR (for A25A-FXS) |
Compressor with motor assembly x Engine |
24.5 N*m ( |
250 kgf*cm, |
18 ft.*lbf) |
|
| Stud bolt x Engine |
4.0 N*m ( |
41 kgf*cm, |
|
35 in.*lbf) |
| Suction hose sub-assembly x Compressor with motor assembly |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Discharge hose sub-assembly x Compressor with motor assembly |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| Discharge hose sub-assembly x Cooler condenser assembly |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |
| CONDENSER |
Discharge hose sub-assembly x Cooler condenser assembly |
5.4 N*m ( |
55 kgf*cm, |
|
48 in.*lbf) |
| Cap x Cooler condenser assembly (for Gasoline Model) |
4.0 N*m ( |
41 kgf*cm, |
|
35 in.*lbf) |
| Cap x Cooler condenser assembly (for HV Model) |
2.9 N*m ( |
30 kgf*cm, |
|
26 in.*lbf) |
| Cooler condenser assembly x Radiator assembly (for Inverter Coolant) (for HV Model) |
9.0 N*m ( |
92 kgf*cm, |
|
80 in.*lbf) |
| AIR CONDITIONING PRESSURE SENSOR |
Air conditioner pressure sensor x Cooler refrigerant liquid pipe A (for HV Model) |
10.8 N*m ( |
110 kgf*cm, |
8 ft.*lbf) |
|
| Air conditioner pressure sensor x Air conditioning tube assembly (for Gasoline Model) |
10.8 N*m ( |
110 kgf*cm, |
8 ft.*lbf) |
|
| HEATER WATER PUMP |
Heater water pump assembly x Vehicle body |
9.8 N*m ( |
100 kgf*cm, |
|
87 in.*lbf) |