DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> General Information >> Maintenance Reminder Light (Reset Procedures) >> Engine Oil Replacement Reminder >> Engine Oil Replacement Reminder Reset - Procedure 04 >> Multi-Information Display (Monochrome Type)

Multi-Information Display (Monochrome Type)

NOTE: There are two possible types of controls for this display: The DISP switch, located on the steering pad switch assembly, or the ODO/TRIP switch knob is located on the combination meter assembly.
  1. With the ignition switch (or Power switch) ON, ensure the odometer is showing TRIP A. Turn ignition (or Power) switch OFF.
  2. Set the ignition to ON position (DO NOT start engine) while holding down trip meter RESET (DISP or ODO/TRIP on some models) button.
  3. Hold trip meter RESET button down for at least 5 seconds until odometer indicates 000000.
  4. When 000000 disappears and the indicator light turns off, the reset is complete.
Diesel-Data.com