Monitor Description
The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from these CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store a DTCs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0606-04 | Control Module Processor System Internal Failure | ECM main CPU malfunction (1 trip detection logic) | ECM | Comes on | DTC stored | SAE Code: P0606 DTC for Mexico Models: - Applies |
| P0606-29 | Control Module Processor Signal Invalid | ECM main CPU malfunction (1 trip detection logic) | ECM | Comes on | DTC stored | SAE Code: P0606 DTC for Mexico Models: - Applies |
| P0606-2A | Control Module Processor Signal Stuck in Range | ECM main CPU malfunction (1 trip detection logic) | ECM | Comes on | DTC stored | SAE Code: P0606 DTC for Mexico Models: - Applies |
| P0606-47 | Control Module Processor Watchdog/Safety MCU Failure | ECM main CPU malfunction (1 trip detection logic) | ECM | Comes on | DTC stored | SAE Code: P0606 DTC for Mexico Models: - Applies |