DTC P0325-15: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open; DTC P0330-15: Knock Sensor 2 Bank 2 Circuit Short to Battery or Open [12/2019 - 10/2022]: Description
Refer to DTC P0325-11.
Refer to DESCRIPTION
HINT:
When DTC P0325-15 or P0330-15 is stored, the ECM enters fail-safe mode. During fail-safe mode, the ignition timing is delayed to its maximum retardation. Fail-safe mode continues until the ignition switch is turned off.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0325-15 | Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open | The knock control sensor (bank 1) output voltage is higher than 4.5 V for 1 second or more (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0328 DTC for Mexico Models: - Applies |
| P0330-15 | Knock Sensor 2 Bank 2 Circuit Short to Battery or Open | The knock control sensor (bank 2) output voltage is higher than 4.5 V for 1 second or more (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0333 DTC for Mexico Models: - Applies |
Reference: Inspection using an oscilloscope.
Refer to DESCRIPTION