DTC P0335-1F: Crankshaft Position Sensor "A" Circuit Intermittent; DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [12/2019 - 10/2022]: Description

Refer to DTC P0335-11.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0335-1F	Crankshaft Position Sensor "A" Circuit Intermittent	Under conditions (a), (b) and (c), no crankshaft position sensor signal to ECM for 0.05 seconds or more (1 trip detection logic): (a) Engine speed is 1000 rpm or higher. (b) Starter signal is off. (c) 3 seconds or more have elapsed since the starter signal switched from on to off. *	Open or short in crankshaft position sensor circuit Crankshaft position sensor No. 1 crankshaft position sensor plate ECM	Does not come on	DTC stored	SAE Code: P0339 DTC for Mexico Models: - Applies
P0335-2A	Crankshaft Position Sensor "A" Signal Stuck in Range	No crankshaft position sensor signal to the ECM while cranking (1 trip detection logic). *	Open or short in crankshaft position sensor circuit Crankshaft position sensor No. 1 crankshaft position sensor plate ECM	Comes on	DTC stored	SAE Code: P0335 DTC for Mexico Models: - Applies
P0335-31	Crankshaft Position Sensor "A" No Signal	The engine stalls and the engine speed signal value decreases rapidly (1 trip detection logic). *	Open or short in crankshaft position sensor circuit Crankshaft position sensor No. 1 crankshaft position sensor plate ECM	Comes on	DTC stored	SAE Code: P0335 DTC for Mexico Models: - Applies

*: When the engine is being stopped or started automatically by stop and start system control, the ECM does not monitor the crankshaft position sensor signal (w/ stop and start system).

Reference: Inspection using an oscilloscope.
Refer to DESCRIPTION