Typical Enabling Conditions
ALL:
| Monitor runs whenever the following DTCs are not stored | None |
P0335 (CASE 1):
| All of the following conditions are met | - |
| Battery voltage | Higher than 6 V |
| Crankshaft position sensor voltage | 0.3 to 4.7 V |
| Starter | On |
| Minimum battery voltage while starter on | Less than 11 V |
| Idling stop control (w/ stop and start system) | Not operating |
P0335 (CASE 2):
| All of the following conditions are met | - |
| Battery voltage | Higher than 6 V |
| Crankshaft position sensor voltage | 0.3 to 4.7 V |
| Starter | Off |
| Engine speed (Top dead center) | 600 rpm or higher |
| Engine speed (30°CA) | 600 rpm or higher |
| Idling stop control (w/ stop and start system) | Not operating |