DTC P0365-2A: Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range; DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal; DTC P0390-31: Camshaft Position Sensor "B" Bank 2 No Signal [12/2019 - 10/2022]: Description

Refer to DTC P0365-11.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0365-2A	Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range	No VVT sensor (for exhaust camshaft of bank 1) signal to ECM while engine cranking (1 trip detection logic).	Open or short in VVT sensor (for exhaust camshaft of bank 1) circuit VVT sensor (for exhaust camshaft of bank 1) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0365 DTC for Mexico Models: - Applies
P0365-31	Camshaft Position Sensor "B" Bank 1 No Signal	No VVT sensor (for exhaust camshaft of bank 1) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic). *	Open or short in VVT sensor (for exhaust camshaft of bank 1) circuit VVT sensor (for exhaust camshaft of bank 1) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0365 DTC for Mexico Models: - Applies
P0390-31	Camshaft Position Sensor "B" Bank 2 No Signal	No VVT sensor (for exhaust camshaft of bank 2) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic). *	Open or short in VVT sensor (for exhaust camshaft of bank 2) circuit VVT sensor (for exhaust camshaft of bank 2) Exhaust camshaft Valve timing ECM	Comes on	DTC stored	SAE Code: P0390 DTC for Mexico Models: - Applies

*: When the engine is being stopped or started automatically by stop and start system control, the ECM does not monitor the camshaft position sensor signal (w/ stop and start system).

Reference: Inspection using an oscilloscope.

Refer to DESCRIPTION