DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FKS) - Diagnostic Codes (1 Of 6) >> SFI System >> DTC P0115-2A: Engine Coolant Temperature Sensor 1 Signal Stuck in Range [12/2019 - 10/2022] >> Procedure

DTC P0115-2A: Engine Coolant Temperature Sensor 1 Signal Stuck in Range [12/2019 - 10/2022]: Procedure

  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0115-2A) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTC P0115-2A is output A
      DTC P0115-2A and other DTCs are output B

      HINT: 

      If any DTCs other than P0115-2A are output, troubleshoot those DTCs first.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 09/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2020 - 10/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2021 - 10/2022] 

    Result: 

    See step  2

  2. INSPECT WATER INLET WITH THERMOSTAT SUB-ASSEMBLY 
    1. Inspect the water inlet with thermostat sub-assembly (thermostat opening temperature).

      Refer to INSPECTION [12/2019 - 10/2022]

      HINT: 

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Refer to INITIALIZATION [12/2019 - 10/2022]

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE ENGINE COOLANT TEMPERATURE SENSOR. Refer to  REMOVAL [12/2019 - 10/2022] 

    Result: 

    NG 

    REPLACE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY. Refer to  REMOVAL [12/2019 - 10/2022]