DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (2GR-FKS) - Service Information >> FUEL INJECTOR (for Direct Injection) >> Inspection [12/2019 - 10/2022] >> Procedure

Inspection [12/2019 - 10/2022]: Procedure

  1. INSPECT DIRECT FUEL INJECTOR ASSEMBLY 
    NOTE:

    This inspection is for checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 1.74 to 2.04 Ω

      If the result is not as specified, replace the direct fuel injector assembly.

      GTY509104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Direct Fuel Injector Assembly)
Diesel-Data.com