Installation [12/2019 - 10/2022]: Procedure

1. Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.
   NOTE:

   Make sure that there is no clearance between the fuel main valve assembly and mesh.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Fuel Main Valve Assembly
   *a	Mesh
   *b	Mini-clip
   *c	No Clearance

2. Install the fuel main valve assembly to the fuel suction tube with pump and gauge assembly.
   NOTE:

   Make sure that the O-ring is not cut or pinched during installation.

1. Engage the 2 claws to install the fuel pressure regulator holder to the fuel suction tube with pump and gauge assembly.

Refer to INSTALLATION [12/2019 - 10/2022]