DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (2GR-FKS) - Service Information >> Fuel Sender Gauge Assembly >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Engage the 2 claws to install the fuel sender gauge assembly to the fuel gauge bracket.
    2. Engage the 2 claws to install the fuel gauge bracket with fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.
      NOTE:

      Be careful not to bend the arm of the fuel sender gauge assembly.

    3. Engage the 3 clamps to connect the wire harness to the fuel suction tube with pump and gauge assembly.
      NOTE:
      • Do not damage the wire harness.
      • When engaging each wire harness to the clamp, engage one wire at a time.
    4. Connect the fuel sender gauge assembly connector.
  2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] 

Diesel-Data.com