Installation [09/2020 - 10/2022]: Procedure

1. Install the wire harness clamp to the starter assembly.
2. Type A:
   1. Install the starter assembly with the 2 bolts.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

3. Type B:
   1. Using an E8 "TORX" socket wrench, temporarily install the starter assembly with the 2 stud bolts.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

   2. Install the starter assembly with the 2 nuts.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

4. Connect terminal 30 with the nut.

   Torque: 9.8 N.m (100 kgf/cm, 87 in.lbf) 

5. Close the terminal cap.
6. Engage the wire harness clamp.
7. Connect the 2 starter assembly connectors.

Refer to PROCEDURE - Step 45

Refer to PROCEDURE - Step 3

Refer to PROCEDURE - Step 50

Refer to PROCEDURE - Step 51

• for Sport Package

  Refer to PROCEDURE - Step 4

• except Sport Package

  Refer to PROCEDURE - Step 4

Refer to INSTALLATION [12/2019 - 10/2022]